List of reports of the 6th international conference recommended for publication in the scientific and practical Journal of Scientific and Applied Research of the National Academy of Sciences of Ukraine “Space Science and Technology”

1. ‚ÄúBoosted dart optimization for maximum altitude on 120 mm diameter booster‚ÄĚ
Florin Mingireanu
Romanian Space Agency (Bucharest, Romania)

2. ‚ÄúNumerical method of determining the bearing capacity of the shell rocket structures with variable rigidity‚ÄĚ
V. Kravtsov
National Aviation University (Kyiv, Ukraine)

3. ‚ÄúDynamic stressed-deformed state of fairing separation device components‚ÄĚ
B. Zaitsev
A. Podgorny Institute for Mechanical Engineering Problems of  NASU (Kharkov, Ukraine)

4. ‚ÄúInfluence of cutouts on strength of cylindrical compartments of launch vehicles at inelastic deformation of material‚ÄĚ
V. Hudramovich
Institute of Technical Mechanics of NASU and SSAU(Dnepr, Ukraine)

5. ‚ÄúEstimation of cost parameters of launch vehicles using reusable first stages‚ÄĚ
V. Pyshniev
Yuzhnoye State Design Office (Dnepr, Ukraine)

6. ‚ÄúNumerical simulation of supersonic flow around launch vehicles equipped with fine control and stabilization elements‚ÄĚ
V. Galinsky
Institute of Technical Mechanics of NASU and SSAU (Dnepr, Ukraine)

7.‚ÄúFeatures of PHSS at the ‚Äúoxygen-methane‚ÄĚ use‚ÄĚ
R. Mikhalchishin
Yuzhnoye State Design Office (Dnepr, Ukraine)

8.‚ÄúSCIENTIFIC SPACE PROJECT ‚ÄúCLUSTERION‚ÄĚ USING A CLUSTER OF SATELLITES YUZHSAT‚ÄĚ
G. Lizunov
Space Research Institute of National Academy of Sciences of Ukraine and State Space Agency of Ukraine (Kyiv, Ukraine)

9. ‚ÄúFEATURES OF CALCULATING TEMPERATURE DEFORMATIONS¬† OF OPTICAL PAYLOADS MADE OF COMPOSITE MATERIALS‚ÄĚ
S. Kushnirenko
Yuzhnoye State Design Office (Dnepr, Ukraine)

10. ‚ÄúRECONFIGURABLE DIAGNOSTIC MODEL OF SPACECRAFT CONTROL COMPLEX‚ÄĚ
Yu. Prokopchuk
NASU and SSAU Technical Mechanics Institute (Dnepr, Ukraine)

11. ‚ÄúMINI-MAGNETOSPHERE AS A CONTROL MEANS OF SPACE VEHICLE IN THE IONOSPHERE OF THE EARTH‚ÄĚ
V. Shuvalov
NASU and SSAU Technical Mechanics Institute (Dnepr, Ukraine)

12. ‚ÄúCONSIDERATIONS OF MATHEMATICAL MODELING OF LOW-FREQUENCY DYNAMICS OF MAIN LRE WITH PREBURNER GAS AFTERBURNING AT STARTUP‚ÄĚ
S. Dolgopolov
NASU and SSAU Technical Mechanics Institute (Dnepr, Ukraine)

13.‚ÄúCONSIDERATIONS OF SOLUTION OF SYSTEM¬† OF NONLINEAR EQUATIONS FOR MATHEMATICAL MODELING¬† OF STATIC PROCESSES, ADJUSTMENT AND SCHEMATIC SYNTHESIS OF LIQUID ROCKET ENGINES‚ÄĚ
M. Sidorenko
Yuzhnoye State Design Office (Dnepr, Ukraine)

14.‚ÄúDESIGN PARAMETERS DETERMINATION¬† OF THE IGNITER FOR SRM BY NUMERICAL SIMULATION METHODS‚ÄĚ
V. Bucharskii
Oles Honchar Dnipro National University (Dnepr, Ukraine)

15.‚ÄúMATHEMATICAL SIMULATION OF SOLID¬† ROCKET MOTOR INTERIOR BALLISTICS CHARACTERISTICS¬† ON OPERATION OF EMERGENCY ENGINE SHUTDOWN SYSTEM‚ÄĚ
V. Litvinenko
Yuzhnoye State Design Office (Dnepr, Ukraine)

16. ‚ÄúAdoption of selective laser melting in the aerospace industry‚ÄĚ
D. Wilckens
(SLM Solutions Group Ag,¬† –ď–Ķ—Ä–ľ–į–Ĺ–ł—Ź)

17.‚ÄúRESEARCH OF MICROSTRUCTURE AND PROPERTIES OF HEAVY PSEUDO-ALLOYS BASED ON TUNGSTEN POWDER‚ÄĚ
V. Savich
Powder Metallurgy Institute (Minsk, Belarus)

18. ‚ÄúPROSPECTS OF CREATING RELIABLE THERMAL BARRIER COATING SYSTEMS UTILISING ELASTOMERIC MATERIALS FOR SOLID PROPELLANT ROCKET ENGINES‚ÄĚ
S. Lavrynenko
State Enterprise ¬ęUkrainian Research Design-Technological Institute of Elastomer Materials and Products¬Ľ (Dn–Ķpr, Ukraine)

19. ‚ÄúEQUIPMENT AND TECHNOLOGY FOR THE ELECTRON-BEAM WELDING OF SPACE-SYSTEM ENGINEERING‚ÄĚ
E. Ternovoy
E. Paton Electric Welding Institute NASU (Kiev, Ukraine)

20.‚ÄúNANOTECHNOLOGIES IS ONE OF THE FUTURE-LEANING DIRECTIONS¬† OF THE COMPOSING OF NEW ELASTOMERIC STRUCTURAL MATERIALS‚ÄĚ
M. Elkady
Oles Honchar Dnipro National University (Dnepr, Ukraine)

21.‚ÄúADVANCED MANAGEMENT SYSTEMS FOR ADVANCED SPACE COMPANIES‚ÄĚ
P. Kalita
Ukrainian Association for Quality (Kiev, Ukraine)

22.‚ÄúIMPACT OF DEVELOPMENT OF ELASTOMERS FOR ROCKET AND SPACE VEHICLES ON DEVELOPMENT OF ECONOMY AND SOCIETY‚ÄĚ
M. Khorolsky
Oles Honchar Dnipro National University (Dnepr, Ukraine)

23. ‚ÄúCHARACTERISTICS OF TECHNOLOGY TRANSFER DEALS IN AEROSPACE INDUSTRY‚ÄĚ
I. Zharikov
Yuzhnoye State Design Office (Dnepr, Ukraine)

24. ‚ÄúNUMERICAL SIMULATION A SUPERSONIC MULTICOMPONENT CHEMICAL REACTING JET EFFLUX OF ROCKET ENGINE‚ÄĚ
A. Deshko
ITM NASU & SSAU (Dnepr, Ukraine)

25. ‚ÄúMODERN APPROACH TO DESIGN MOBILE SERVICE TOWER‚ÄĚ
A. Markov
State Enterprise ¬ęUkrainian Research and Technology justify of Metallurgy Industry ¬ęEnergostal¬Ľ, Kharkov, Ukraine

26. ‚ÄúMETHOD OF PARAMETERS DETERMINATION FOR ELECTRIC POWER ACCUMULATOR OPERATING AS A PART¬† OF INDEPENDENT ELECTRIC POWER SUPPLY SYSTEM OF MOBILE MISSILE LAUNCH SYSTEM‚ÄĚ
K. Zemlianoi
Yuzhnoye State Design Office (Dnepr, Ukraine)

27. ‚ÄúEXPERIMENTAL INVESTIGATION OF GAS COOLING IN CRYOGENIC HEAT EXCHANGER‚ÄĚ
I. Selezn’ova
Yuzhnoye State Design Office (Dnepr, Ukraine)

28. ‚ÄúTRANSPORTER/ERECTOR DEVELOPMENT FEATURES IN TERMS OF COMPETITIVE CAPABILITY‚ÄĚ
S. Chabanenko
Yuzhnoye State Design Office (Dnepr, Ukraine)